PCB Spacer
This year the mechanic's team changed the spacers to fixate the PCBs. This new way makes sure the PCBs are more secure than the previous design. All the spacers used are nylon standoffs, to not scratch the PCBs. Also, nylon screws are used for the same reason.
| Type | Where used | Amount (per robot) |
|---|---|---|
| Standoff m3 15mm Female-Male | To fixate the Kicker PCB | 2 |
| Standoff m3 15mm Female-Female | To fixate the Top PCB | 6 |
| Standoff m3 20mm Female-Female | To fixate the Power PCB and are used for the long standoff between the middle and top plate | 4+6 |
| Standoff m3 18mm Female-Male | Used for the long standoff between middle and top plate | 6 |
| Standoff m3 12mm Female-Male | To stabilise the shirt | 4 |
| Nylon screws m3x6mm | To fixate the PCBs | 18 |
They are all ordered via Aliexpress.