Shirt Standoffs

RoboTeam changed this year the way how we fixate the shirt. In previous years used a thumb screw to fix the shirt to the robot. This year thumb nuts are used and thus the screw will stick outwards the shirt. This is done to easier place the shirt onto the robot as in previous years there was always a search for the screw hole. Due to the change in the way how we fixate the shirt, there is also an update to the standoff of the shirt. This is shown in the picture. In this design, a black long screw (m3x40mm) goes through this standoff, where the thumb nut will be fixated to it. A black screw is used due to competition use of vision.